Spiral paper core making machine is an industrial equipment for producing paper tubes. The equipment uses a rotating core shaft to spiral wrap paper strips to form continuous paper tubes. The production process includes cutting, gluing and rolling tubes, drying, and precision cutting.

Steps for using spiral paper tube making equipment

1. Preparation before equipment startup: Check whether all components of the equipment are intact, ensure stable power supply, clean up debris around the equipment, and keep the operating environment clean.

2. Equipment startup: According to the requirements of the equipment manual, start each device in sequence, observe the operation of the equipment, and ensure the normal operation of the equipment.

3. Paper winding: Place the paper on the unwinding device, adjust the paper tension, and make the paper smoothly enter the forming device. By adjusting the relevant parameters of the forming device, the paper is wound according to the preset shape and specifications.

4. Paper tube winding: Feed the wound paper into the winding device, and adjust the winding speed and pressure to tightly wind the paper into a paper tube.

5. Paper tube cutting: When the paper tube reaches the preset length, the cutting device will automatically cut off the paper tube. At this point, the operator can remove the cut paper tube and air dry it.

6. Equipment shutdown: At the end of production or when the spiral paper tube making machine needs maintenance, according to the requirements of the equipment manual, turn off each device in sequence and disconnect the power supply.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

​Phone/Wechat/Whatsapp:+86 13303078975