The debugging of the carton partition assembly machine mainly involves the inspection and adjustment of various components of the equipment to ensure its normal operation and grid insertion accuracy.

Main debugging steps

The testing of a automatic partition assembly insert machine usually includes the following key steps

1: Equipment inspection: Before operation, a comprehensive inspection of the equipment is required, including whether the conveyor belt, grid cutter, motor and other components are intact, to ensure that the equipment is in normal working condition.

2: Guide rail and synchronous adjustment: For cardboard guide rails, synchronous adjustment is required to ensure accurate positioning of the cardboard during transportation and avoid deviation. This usually involves adjusting the relevant screws or handles to move the conveyor belt to the corresponding position.

3: Pressing section adjustment: The pressing section is an intermediate station between the main machine and the conveying section, used for pressing and measuring formed paper boxes. It is necessary to adjust the distance between the pressure rod and the pressure paper tape to ensure that the paper box can be smoothly introduced into the conveying section. At the same time, adjust the gap between the pressure rollers according to the thickness of the paper box to change the pressure.

4: Conveyor section adjustment: The conveyor section is composed of a belt conveyor, which applies pressure to the paper box. The pressure can be adjusted by a tension spring. When the cardboard box is thick, the spring pressure can be appropriately reduced, and when it is thin, the pressure can be increased.

Precautions for cardboard partition assembler machine

Safety first: During the debugging process, it is essential to pay attention to safety and follow the operating procedures.

Gradual debugging: It is recommended to start with basic inspections and gradually fine tune each component to avoid adjusting too many parameters at once.

Reference manual: Different models of slot machines may have differences, and the most accurate debugging method should refer to the official manual attached to the equipment.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

​Phone/Wechat/Whatsapp:+86 13303078975