The normal operation of the paper tube making machine is directly related to production efficiency and product quality. Scientific and reasonable maintenance can not only extend the service life of the equipment, but also effectively avoid malfunctions and shutdowns. The following are the key points for maintaining the automatic paper core tube making machine:

1、 Daily cleaning and lubrication
Regular cleaning of automatic paper core making machine: Remove accumulated paper scraps, dust, and residual rust inhibitors inside the equipment to prevent impurities from affecting the accuracy of mechanical operation.
Standardized lubrication operation: After equipment cleaning, add lubricating oil that meets the standard to each operating component to ensure that the oil level reaches the specified oil level, reduce wear, and maintain smooth operation.

2、 Mechanical component inspection and adjustment
Belt tension and winding angle: If the surface of the paper tube is uneven or the spiral line is uneven, it is necessary to check whether the belt tension is sufficient and adjust the winding angle to avoid unilateral compression of the paper tube.
Fastener inspection: Regularly check whether screws, nuts, and other connecting components are loose, tighten them in a timely manner, and prevent component detachment or equipment damage caused by vibration.
Scraper state and angle: Ensure that the scraper is at a right angle to the paper tape, keep the blade surface clean, and avoid uneven application of adhesive; Adjust the blade angle as necessary to control the amount of glue applied.
3、 Safe operation and protection
Proper wearing of protective equipment: Operators should wear safety helmets, protective goggles, dust masks, etc. Female workers should wear helmets to prevent their hair from getting caught up in rotating parts.
Prohibited illegal operations: It is strictly prohibited to put hands under the blade, pressure iron or rotating shaft during operation. Manual measurement, lubrication or cleaning operations are not allowed, and the machine must be stopped before operation.
Power outage maintenance: Before equipment maintenance, the power must be cut off to ensure safe operation.
4、 Regular professional maintenance
Develop a periodic inspection plan, with dedicated personnel responsible for professional testing and calibration of key components such as electrical systems, relays, and coupling coaxiality.
For severely worn components such as belts and blades, it is recommended to replace them in a timely manner and choose customized belts with high wear resistance and strong tensile strength to enhance stability.