The safe use of paper board edge protector machine requires attention to the following points:

Preparation before operation:

Equipment inspection: Before operation, carefully check whether all components of the paper corner protector are intact, whether the electrical circuit is normal, and whether the oil is sufficient to ensure that the equipment is in good condition.

Lubrication and maintenance: According to the requirements of the equipment manual, lubricate and maintain the moving parts of the paper corner protector to reduce wear and extend the service life of the equipment.

Tool preparation: Prepare necessary tools such as wrenches, screwdrivers, etc. for possible use during operation.

Operation steps of the paper corner protector machine:

Start the device: Confirm that there are no personnel or debris around the device, turn on the power switch, and start the paper corner protector. Observe whether the equipment is running normally and whether there are any abnormal sounds or vibrations.

Feeding: Place the paper corner protector material at the feeding port and slowly push the material to avoid equipment damage caused by excessive or rapid pushing of the material.
Adjust parameters: Adjust the pressure, speed, and other parameters of the paper corner protector according to production needs to ensure that the adjusted parameters meet production requirements.

Production process monitoring: closely observe the working status of the paper corner protector to ensure a smooth production process. If any abnormal situation is found, stop the machine immediately for inspection and troubleshooting.

Stop the equipment: When production is completed or an emergency situation occurs, immediately stop the paper edge protector equipment , turn off the power, and ensure that the equipment is in a safe state.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975